MI 3143 Euro Z 800
Maintenance
23
8
Maintenance
Unauthorized persons are not allowed to open the Euro Z instrument. There are no user
replaceable components inside the instrument. Batteries can only be replaced with certified
ones and only by authorized persons.
8.1 Cleaning
No special maintenance is required for the housing. To clean the surface of the instrument, use
a soft cloth slightly moistened with soapy water or alcohol. Then leave the instrument to dry
totally before use.
Warnings:
Do not use liquids based on petrol or hydrocarbons!
Do not spill cleaning liquid over the instrument!
8.2 Periodic calibration
It is essential that the test instrument is regularly calibrated in order that the technical
specification listed in this manual is guaranteed. We recommend an annual calibration. Only an
authorized technical person can do the calibration. Please contact your dealer for further
information.
8.3 Service
For repairs under warranty, or at any other time, please contact your distributor.
8.4 Upgrading the instrument
The Euro Z instrument can be upgraded from a PC via the RS232 communication port. This
enables to keep the Euro Z instrument up to date even if the standards or regulations change.
Download the latest firmware on the Metrel download centre:
https://www.metrel.si/en/downloads/
Special upgrading software -
FlashMe
will guide you through the upgrading procedure.
For correct connection, see
Figure 8.1
. Contact your dealer for more information.
Figure 8.1: RS-232 Interface connection required for upgrading the Euro Z instrument
