OmegaPATPlus / BetaPATPlus Other instrument operations
77
Special label printer (
Printek MtP300 / MtP400,
Intermec EasyCoder C4
) is also
supported by the instrument. When printing barcodes to the special printer, two different
options can be set in
Barcode systems
submenu. If
single
option is selected, only
appliance name is printed out as a barcode on appliance barcode label. When
double
is selected, both autotest shortcut code and appliance name are printed out as a
barcode on appliance barcode label.
Notes on Aus/NZ model:
Ì
Special characters (?, > or <) between autotest shortcut code and appliance
name (ID number) are used to identify single or double tag. Symbol '?' means
that only one tag was used for appliance. Symbols '<' and '>' indicate that two
appliance IDs were stored after performing autotest sequence and also two tags
were printed out.
Ì
Only appliance ID is printed out on the 2
nd
appliance label (power supply cord
label).
Notes on UK model:
Ì
Special character »$« between autotest shortcut code and appliance name (ID
number) is used to distinguish shortcut code from appliance name.
Ì
Only appliance ID is printed out on the 2
nd
appliance label (power supply cord
label).
9.3.7 Password
In password protected actions, it is necessary to enter the password before deleting or
editing the protected data. The instrument requires a password and it will not allow
changes unless the correct password has been entered.
From the
Main menu
, select
Setup
and the select
Password
by using
¿
and
À
cursor
keys and press ENTER key to confirm.
Password submenu
will be displayed.
Password menu
Enter a password and then press ENTER key to accept the new password. By pressing
the ESC key instrument returns to
Setup menu
without any changes.
Please take a note of this password and keep it in a safe place.
If there is no password protection, the instrument will request that you enter a new
password twice, once to confirm.
