METREL A 1446, User Manual

Page: 7 / 51

Flex current clamps A 1446
7
3.1 Applicable standards
The current clamps are designed and tested in accordance with the following
standards:
Electromagnetic compatibility(EMC)
61000-4-3:2010 (with A1 + A2)
Electromagnetic compatibility (EMC) - Part 4-3:
Testing and measurement techniques - Radiated,
radio-frequency, electromagnetic field immunity
test
EN 61000-4-8: 2009
Electromagnetic compatibility (EMC) – Part 4-8:
Testing and measurement techniques – Power -
frequency magnetic field immunity test
Safety (LVD)
EN 61010-1: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 1: General requirements
EN 61010-2-032: 2012
Safety requirements for electrical equipment for
measurement, control and laboratory use
Part 2-032: Particular requirements for hand-held
and hand-manipulated current sensors for
electrical test and measurement
Note about EN and IEC standards:
Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.