3
6.
Remove (1) screw holding the accessory panel to the sub-dash. Locate panel clips and carefully pull each
section free; this may require the panel removal tool.
7.
Locate the power outlet. Disconnect the power outlet harness and connect the accessory power harness to
that connector. Insert the other accessory power harness connector into the disconnected plug.
8.
Connect t-harness and route accessory wires as indicated:
a.
Red of the T-Harness, to the accessory turn on of the controller.
b.
Black of the T-Harness, to the black ground wire of the controller.
9.
Locate passenger side tube, make connection to the controller and secure tube to dash brace.
10.
Take Passenger interior harness, connect to dash tube and route wire under door sill trim, carpet,
and under the passengers seat. Connect harness to under seat tube and secure to seat.
