7
24.
Connect cable labeled
“
Right Side to RR Wheel and Rear Bumper
”
, to connection and route cable
to the rear fender rock light. (Fasten the rock light, using the same technique from steps 19 and
22)
25.
Complete routing cable to rear bumper, connect cable to rear tube and mount using supplied
clamp and self-tapping screws.
26.
Connect the cable labeled
“
Rear Bumper to LR Wheel and Left Side
”
to rear bumper tube, and
route cable to drivers side (left) rear rock light. (Fasten the rock light, using the same technique
from steps 19 and 22)
27.
Continue routing cable to drivers side (Left) rocker panel, connect tube to cable and secure tube
using supplied clamp and self-tapping screws. (Same as step 23)
28.
Route "Left Side to Controller" cable down firewall and connect to the driver side (left) tube.
29.
Connect the RED wire of the light controller labeled “Ignition”, to the red wire
and the black of the
included t-harness connected to the power outlet of the Jeep. (Installed in steps 6-8)
30.
Connect the Yellow wire, to the Jeeps battery, ensuring all bolts are tightened.
31.
Using supplied zip ties, review all cable routing. Securing any slack with zip ties, making sure to
avoid pinch point, anything that moves or rotates, and hot exhaust pipes.
