|
41
5.7.2019
Metos SP-100A, SP-200A, SP-30HA, SP-40HA, SP-60HA, SP-A80HI, SP-B80HI
6
Figure A
THE REMOVABLE BOWL GUARD
The interlocking bowl guard now is available to remove for
cleaning purpose. With separated handles, it can easy take out the bowl
guard and cleaning in a sink or dishwasher.
Open / Closing the Bowl Guard:
To open the bowl guard, holding the separated handle, and
rotating clockwise. (See Figure A)
To close the bowl guard, rotating counterclockwise until the bowl guard is in
the locked position. (See Figure B)
NOTE: When the guard is open or not properly installed, the mixer will not
operate.
NOTE: Removable Bowl Guard is not available for SP-A80HI, SP-A80I, SP-B80HI
and SP-B80I.
Removing and Attaching the Bowl Guard:
NOTE: Before removing or attaching the bowl guard, make sure the bowl is in
the down/lower position and the agitator is taking off from the planetary
shaft.
To remove the bowl guard, push the upper and lower part of the
separated handle in different way (upper part – counterclockwise, lower part –
clockwise) and divide the handle. (See figure C)
When the handle separated, hold the lower handle and continue turning
the guard clockwise until the guard releases from the ring catch on the mixer.
(See figure D)
To reattach the bowl guard, line up the ring catch on the
left of the mixer; lift guard gently into place and rotate the
guard’s lower handle counterclockwise until it snaps back into
place with the upper part of the handle.
Operating Instructions
Figure B
Figure C
Figure D
