Pawkit
4
GETTING STARTED
forms a vapor seal with the sensor. Any sample material left
on the cup rim may prevent this seal and contaminate future
samples.
•
If you are reading a sample at a later time, put the
sample cup disposable lid on the cup to restrict water
transfer.
To seal the lid, place tape or Parafilm
TM
completely
around the cup/lid junction. It is necessary to seal the cup if
it is going to be a long time before you make the measurement.
4.2.2
Sample Placement
1. Open the Pawkit by holding the case near the LCD with one
hand and pulling down on the plastic sensor cover tab with the
other hand.
The sensor cover rotates and snaps into the open position.
13
