56 | 120
blue’Log X series
11.3
Alarm configuration
1.
Navigate to the "Monitoring" area via the top navigation bar.
2.
Navigate to the "Contact addresses" area via the left-hand navigation menu.
Fig. 43: Device websites: Alarm configuration
3.
Enable monitoring.
4.
By selecting "+" in the "Contact(s) for e-mail notification" field, a previously created
contact (see Section 11.2 Contact addresses) can be selected. Alarm messages
registered by the blue’Log are sent to this contact via e
-mail.
5.
If "Portal synchronization" is enabled, the alarms will also be sent to your registered
portal account and therefore may be viewed online as well.
