40 | 120
blue’Log X series
7.16
Portal communication
In the "Online portal"
"Communication" menu, the interval at which the data logger is
to report to the portal can be set.
1.
Navigate to the "PV system" area via the top navigation bar.
2.
Navigate to the "Online portal" area via the left-hand navigation menu and then click
on "Communication".
Via the corresponding radio button, you can specify
whether your blue’Log
should report to the online portal at regular intervals or at set times in order to
transfer the measurement data collected.
7.16.1
Reporting at regular intervals
Specify whether the blue’Log data logger should report to the portal every f
ive, 15
or 60 minutes.
If the data should only be transferred during a specific time window, enter a start
and end time for data transfer. The selected interval (five, 15 or 60 minutes) will
then apply within this time window.
7.16.2
Reporting at set times
Specify specific times (full hours) during which
the blue’Log data logger should
report to the portal.
A maximum of 24 full-hour times can be selected.
