www.metel.eu 14/23
www.iplog.eu
Event Management - RELAY, Camera
RELAY
Programmable relay output switch
MODE
Set only
- activates the selected output
Reset only
- deactivates the selected output
Set/Reset
- copies the status of the input to the output
Reset/Set
- the same with negation
Override On -
power on with higher priority
Override Off -
shutdown with higher priority
Override On/Off -
on/off with higher priority
Override Off/On -
the same with negation
Pulse Set
- activates the output for the set time
Pulse Reset
– deact. the output for the set time
Example:
The status of the remote input (Direct mode) is copied to the local relay by events with ID#99.
„Extension / Output“
Menu for setting the programmable relay OUT1.
Digital - digital input evaluation mode
La
bel
-
output naming (stored in the project sw. SIMULandv4)
Negation
- output negation
Enable manual output
- enable relay control from Simuland
Output state (checked = activated)
- in combination with enable manual
output the relay will be closed
Pulse duration (s)
- length of closing / opening in pulse mode
&
The METEL-COMIO-DIO-MIB file MIB is available for SNMP relay
control.
Camera
Controls up to 8 Onvif cameras or HTTP commands.
CHANNEL
- camera number set in the "Extension / Camera" menu
MODE
Move
- sends a PRESETx command via the Onvif protocol,
SET TEXT
- displays text in the AXIS camera
image,
URLx
- sends the HTTP command specified in "Camera / User commands" with the
PARAM
Example:
If the ALARM 1 input is in the Alarm state, the switch sends a command to the CAM 3 Onvif to
turn to Preset 5.
„Extension / Camera“
Menu for entering IP parameters and camera logins
to be controlled via automatic actions.
ONVIF
- camera controlled by Onvif protocol Prof. S
Axis
- camera controlled by CGI commands AXIS
Other
- camera controlled by user commands URL1
to 8 in the "Camera / User Commands" menu
