30
®
MIG150 - NLFRENES - v1.0 - 12112013
EN
2 Product description
2�1 Product application
MIG welding machine adopts special tapped transformer adjusting style. It is an industrial product, it have
wire-feed system, small volume, easy to shift and simple operation, it apply to welding low-carbon steel, low-
alloy steel and so on.
2�2 Model unit
- -
9
Chapter1 Product description
1.1 Produce application
MIG series welding machine adopt special tapped transformer adjusting style. It is an industrial
product, it have wire-feed system, small volume, easy to shift and simple operation, it apply to welding
low-carbon steel
、
low-alloy steel and so on.
1.2 Model unit
2�3 Voltage and current characteristics of welding power source
The curve (fig.1) means “V-A” external static characteristic of welding power, gradient of cure named slope,
normal means “drop off voltage per 100A”. The curve shows the output voltage we can get in any preset
output current because the “V-A” slope id fixed.
- -
10
1.3 Voltage characteristic and current characteristic of welding power source
The curve (as diagram1-1)
means “V
-
A” external static characteristic of welding power,
gradient of
cure named slope, normal mean
s “drop off voltage per 100A”.
The curve shows the output voltage we
can get in any preset output current because the “V
-
A” slope id fi
xed.
Diagram 1-1 External static characteristic
Chapter1 Product description
1.4 Equipment condition
a) Surrounding temperature range
During welding:
－
10
℃～＋
40
℃
During transit and storage:
－
25
℃～＋
55
℃
b) Opposite humidity
when 40
℃
<50%
when 20
℃
<90%
c) D
ust acid active gas or object in surrounding air can’t exceed normal content,
except these
objects that be brought by welding course.
d) Altitude height must
≤
1000m
e)
Gradient of welding power
≤
15
°
1.5 Noise announce
When the machine working, it maybe have noise,
but the noise can’t exceed
75 decibel.
1.6 Safety
Before operating the equipment, you must read the safety directions to avoid the hurt that
because of misapply and impropriety in stalling.
1.7 Accessories
1.7.1 Hammer brush
In order to operate the machine confidently, our company will give you one hammer and one
brush as present.
2�4 Equipment conditions
Surrounding temperature range
During welding: -10°C ~ +40°C
During transit and storage: -25°C ~ +55°C
Humidity
When 40°C < 50%
When 20°C < 90%
Altitude
Altitude height must be < 1000 m
Gradient of welding power
< 15°
Fig. 1: External static characteristic
copyrighted
document
- all
rights
reserved
by
FBC
