27
®
MIG150 - NLFRENES - v1.0 - 12112013
EN
1 Safety
WARNING! Read and save the instructions
1.1 General safety rules
Work area
• Keep work area clean and well lit.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust.
• Keep children and bystanders away while operating a power tool.
Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
• Do not expose power tools to rain or wet conditions.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication.
• Use safety equipment. Always wear eye protection.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in.
• Remove any adjusting key or wrench before turning the power tool on.
• Do not overreach. Keep proper footing and balance at all times.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
Power tool use and care
• Do not force the power tool. Use the correct power tool for your application.
• Do not use the power tool if the switch does not turn it on and off.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tools operation.
• If damaged, have the power tool repaired before use.
• Keep cutting tools sharp and clean.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner
intended for the particular type of power tool, taking into account the working conditions and the work to
be performed.
copyrighted
document
- all
rights
reserved
by
FBC
