background image

38

7. 

Parts catalogue

USING THE PARTS CATALOGUE

Use the Catalogue as follows:

a)  Determine the location of the part to be replaced (which assembly of the machine contains 

the part).

b)  Find the appropriate assembly drawing with the part number you are looking for.

c)  Use this number to find the appropriate drawing or catalogue number in the table description 

and the number of items.

ORDERING INFORMATION

Spare parts may be ordered by phone or by mail stating:

a)  Address of the buyer,

b)  Name, symbol and serial number of the machine and its year of manufacture,

c)  Detailed name of the part,

d)  Drawing number or standard number from the Parts Catalogue,

e)  Number of items,

f)  Terms of payment.

The  parts  shall  be  sent  using  a  courier  service  or  picked  up  by  the  customer  from  the 

manufacturer or the nearest Metal-Fach representative.

8. 

Warranty conditions and warranty services

The detailed information on the warranty for agricultural equipment is listed in the Civil 

Code, Part III, Warranties, art. 577-581. The information should be available at every farming 

equipment dealership and service workshop.

The organisations responsible for the execution of warranty services (reseller/dealer) should be 

entered in the warranty card during the sale of the machine.

Summary of Contents for T466











































Reviews: