background image

10

21. Always mind the steerability and braking performance of the tractor! The machine installed 

on or coupled to the tractor, as well as the front and rear weights affect traction, steerability 

and braking performance of the tractor.

22. Check the braking performance before driving!

23. When cornering with the machine suspended or hitched, mind the reach of the machine and 

its inertia!

24. Always adapt your driving speed to the traffic!

25. Before driving downhill, always shift into a lower gear!

26. Exceeding the permitted load capacity may result in an accident.

27. During  all  adjustments  and  servicing,  lower  the  machine  into  its  rest  position,  stop  the 

tractor engine, ensure that all rotating parts have stopped and decouple the drive shaft.

28. All  components  loosened  for  inspection,  repairs  or  replacement  must  be  permanently 

reaffixed.

29. In case of cut, wash the wound and sterilise with hydrogen peroxide. Contamination of the 

wound may result in hazards to health and life!

30. Do not carry persons, animals or objects that are irrelevant to operation on the machine.

31.  The PTO drive shaft guard must be always installed and secured with chains from turning. 

Replace all damaged guards immediately.

32. Exercise extreme caution when travelling on public roads and follow the valid traffic code. 

Install a triangle warning sign when in transit.

33. Fill the tank of the spreader coupled with the loader only with the PTO shaft decoupled and 

the dosing openings closed.

34. Do not enter between the tractor and the loader when the tractor engine is running.

35. Do not leave the loaded loader lifted unattended.

36. Do not use the loader to haul, push or strike any objects.

37. Exercise extreme caution when unloading or loading near power lines. Keep a safe distance 

from live power cables.

38. Do not assign any person to operate the loader before making sure that they have understood 

the rules of operation and safety regulations.

39. Do not transport any persons or cargo with the loader.

40. When  driving  the  tractor  coupled  with  the  loader  and  the  fertiliser  spreader,  retract  the 

loader arm and set it horizontally. Install red-and-white warning plates with lamp clusters 

on both sides of the spreader. Install the slow-moving vehicle sign in the bracket on the back 

of the spreader. Install a red-and-white warning side with a red parking light at the back of 

the loader arm.

41.  Check the fastening of the support on the loader before driving.

Summary of Contents for T466











































Reviews: