31
Calculated values
Values permissible for the
tractor
Values permissible for the
actual tractor tyres
P1c
P2c
Pc
Fill out the table above and verify the following:
The calculated values are equal to or less than the permissible values for the tractor and
for the tyres.
The tractor front axle load with the minimum load is greater than or equal to 20% of the
tractor load.
Warning!
Do not suspend the loader-spreader-big bag unit of the tractor,
when:
The total calculated load exceeds the permissible value.
The front axle load is smaller than the required minimum.
4.
Working with the loader
In order to achieve proper performance of the arm, follow these guidelines:
Always engage the tractor's parking brake when charging with the loader. Tractor wheels
can also be chocked if necessary.
Make sure before loading that the machine rests firmly on a stable ground.
Avoid charging/loading on slopes; if this is unavoidable, exercise extreme caution.
Do not lift the load higher than necessary for free loading and unloading.
Always lubricate the loader according to the schedule.
Always inspect all fastening bolts. Retighten as necessary. See the tightening torques
listed in the instructions.
Always check the loader for any cracks or damage on the support frame, the upper arm,
the extended arm and the actuators.
Before connecting the hydraulic system, make sure that all control levers are in neutral
positions.
Make sure that all pressure/return lines are properly connected.
Bleed air from the hydraulic system by actuating each function several times. In order to
remove any air from the system, set the actuating elements in extreme positions several
times.