Metacon-Next
OHD-C EI(1) 60 / EI(2) 90 / EW 90
18-05-2021
User manual
art nr: 89022
Rev: 2
7
When using a deadman’s control system, the door will stop immediately after
releasing the control element.
If there is a safety edge, the door will automatically go up again after contact with an
object and/or person.
Optionally, a photocell can be added to the safety edge function.
If a set of light strips is installed, the door will not close in this case if the sensor
detects an object in the path of this safety device. Please note that this only works in
the line/area of the safety sensor. An object and/or person is detected outside of
this.
Please note that safety devices are not designed to operate the door!
To put the door back into operation after the safety edge/light strip has been triggered,
please remove the objects and/or persons from the detection area of the safety devices.
4.2
Self-closing function
If the door is in the open position at the time it is "controlled" by an (automated)
detection/alarm system and mains power failure, it will close automatically. This is done by
means of an electric drive with a gravitational failsafe system. A gravitational failsafe system
means that the door can still close by gravity if the electrical equipment fails/cuts out. This
movement is controlled by a speed limiter. When being "controlled", the door will not take
into account any objects/persons underneath the door and will close immediately. As an
optional extra, the safety light strip can be kept temporarily active and closed with a forced
closure after a set time.
It is strictly forbidden to place any goods/materials in the "operating zone" of the closing
and/or opening door leaf.
4.3
Actions after improper use
If an object has become trapped under the door and the door has come to a standstill as a
result, perform the following actions:
Move the door up a little bit, so you can remove the object.
After the object has been removed, close the door completely! Before opening the
door.
Should one of these actions fail, please contact the supplier.
5
Technical specifications
Please refer to the order confirmation and/or packing slip.
