Metacon-Next
OHD-C EI(1) 60 / EI(2) 90 / EW 90
18-05-2021
User manual
art nr: 89022
Rev: 2
4
User manual of any accessories supplied.
DoP (Declaration Of Performance).
The installation company must follow all the guidelines in the assembly instructions.
The user must follow all the instructions in the user manual. The user manual must
be handed over to the user upon delivery to be left with the door.
© COPYRIGHT
Metaalwarenfabriek Metacon B.V. holds the copyright for this manual. All
worldwide rights reserved. Copying, translating, editing or saving this manual or
parts thereof on an electronic medium is not permitted without the prior written
permission of the copyright holder.
2
Introduction
This fire-resistant door is mainly intended to separate connected spaces (fire compartments)
in case of fire and/or smoke development. The purpose of this is to prevent the fire from
spreading to other areas and/or adjacent premises. The fire shutter door can be controlled
by a fire alarm system, but can also be controlled by a "stand-alone" alarm system.
The CE marking issued is only valid for the performance mentioned in the Declaration Of
Performance (DoP).
In accordance with the NEN-EN 12635 standard, this document will cover the installation
instructions and instructions for first use following the user instructions.
3
Safety
When installing the fire door, the (safety) rules applicable to the situation must be observed,
e.g. the Working Conditions Act. In addition to the regulations, the instructions in this
document should be strictly followed. When installing electrical components, the
instructions supplied by the manufacturer of these components must be observed.
As Metacon is only a manufacturer/supplier of "semi-finished products", it is the
responsibility of the installer to work according to the relevant rules.
The manufacturer of the fire door cannot be held liable for any damage or injury resulting
from non-compliance with this user manual or the maintenance instructions, or from
improper use.
