Metacon-Next B.V.
RGS EI(1) 30 - EI(2) 60 - EW 240
12-07-2022
User Manual
art no: 89072 Rev: 1
18
Step 6b: Installation and tensioning of the chain
Place the chain over the sprocket wheels and mark the required length, then remove the
chain.
Cut the chain to the right length and place it on the sprockets using the supplied shackles.
When tensioning the chain, make sure that it is not overtightened.
If the chain tension is insufficient, the roll-down protection can be activated due to the slack
in the chain.
After tensioning the chain, check that the sprocket wheels are still correctly aligned.
