Metacon-Next B.V.
RGS EI(1) 30 - EI(2) 60 - EW 240
12-07-2022
User Manual
art no: 89072 Rev: 1
25
9
Initial use
The first use is performed by the installation company. This party must complete the
document; "Appendix A" immediately after installation and leave it at the door.
The door should be checked against the check/maintenance list and each step should be
ticked off and signed incl. name in block letters.
The door has a sound pressure level of 70 dB(A) or lower when commissioned.
When this check is positive on all points, the door can be delivered to the user.
10
Maintenance, faults and repairs
10.1
Regular maintenance
Each door is provided with an identification stating the type of door and the order number
and position number. In case of any malfunction, this number should be communicated to
the supplier. Metacon-Next keeps a technical file in the archive with reference to the order
number and position number.
For the correct functioning of the installation it is necessary to have regular maintenance
carried out. In order to claim on the manufacturer's warranty, maintenance must be carried
out at least once a year under "normal" use. Maintenance should be performed by a
competent installer. Metacon-Next recommends entering into a maintenance contract with
the supplier. Insufficient maintenance may lead to an unsafe situation. See EN 12635.
The following steps should be checked during maintenance (and first use);
Appendix B "Door type - maintenance instructions".
10.2
Cleaning
The frequency with which the door is cleaned is up to the user. It is recommended that once
a year the door be wiped only with a damp cloth to prevent any damage. Other cleaning
methods will result in termination of the manufacturer's warranty. Make sure that electrical
parts do not come into contact with moisture during cleaning. Note that climatic conditions
may lead to a changed cleaning frequency.
10.3
Faults and repairs
During maintenance and repair work, the door must be powered down. Troubleshooting and
repairs should be carried out by competent installers. In case of a malfunction, the supplier
should be contacted. If the supplier cannot solve the malfunction, Metacon-Next can be
contacted.
