Operating Instructions
Operating Instructions
METACAP Spray Gun D/A
8-16
Version/Edition July 2008
—
Turn the screw as long as the required coating material quantity
becomes visible.
5. Now move the spray gun to and fro in front of the work piece and ensure
a vertical spray beam, if possible (see figure 2).
Figure 2:
Guiding of the METACAP Spray Gun D/A
Attention!
Intensive waving will cause the air jacket will become unstable, allowing
clouds of atomized spray material to escape.
6. Now, adjust the required spray beam, as described below:
—
Necessary adjustments to modify the spray beam
—
The shape (circular or wide) of the spray beam will be directly
adjusted on the nozzle cap (1/2). The nozzle cap is spring-mounted
and engages automatically in the corresponding positions.
—
To adjust the shape of the spray beam, engage the nozzle cap in the
required position by means of the horns.
—
The horns are horizontal to the gun axis: vertical wide spray beam.
—
The horns are vertical to the gun axis: horizontal wide spray beam.
—
The horns are transversal to the gun axis: circular spray beam.
See figure 3.
