Chapter 8
Setup
For devices operated in “safety mode“, the operator code is required to access the setup menu.
By default the operator code is set to 111.000.
8.1
The Setup Menu
The “Setup“ menu contains four submenus:
• The “Instrument Setup“ selects the measured gas pair, the units and the T90 response time
of the exponential filter.
• The “Relay Setup“ defines the conditions to trigger the relays.
• In the “Output Setup“ the properties of the external signal channels are set.
• The “Expert Setup“ gives write access to the parameters, reset functions, access modes
and codes and test signals for subsequent connected equipment.
The “Setup“ menu contains four submenus:
• The “Instrument Setup“ selects the measured gas pair, the units and the T90 response time
of the exponential filter.
• The “Relay Setup“ defines the conditions to trigger the relays.
• In the “Output Setup“ the properties of the external signal channels are set.
• The “Expert Setup“ gives write access to the parameters, reset functions, access modes
and codes and test signals for subsequent connected equipment.
File name: Manual_FTC400_1.09KD181129CWI1V01.pdf
