42
GENERAL WARNINGS
GENERAL
WARNINGS
7
Before using the device for the first time, read the Instructions for Use
carefully and follow the recommendations.
The MESI ABI device users must be adequately educated to use
the device. The education must be performed by the trained MESI
representative. Before the first use of the device, users must read the
entire Instructions for Use for carefully and follow the instructions for
the use of the connected equipment.
7.1 PATIENT INJURY PREVENTION
Do not place the cuffs on wounds, as this may cause additional injury.
Only place the cuffs on the upper arms and lower legs.
In case of the presence of intravenous cannulas or arteriovenous (AV)
fistulas in the limbs, the cuffs and measurement can cause injury to
the limb.
If the patient has had breast surgery, do not place the arm cuff on the
side which has been operated on.
Do not use the device on a patient while they are connected to a vital
sign monitor.
Check the pressure in the cuff several times during measurement. If
the cuff puts pressure on the limb for too long, it can impair the blood
flow.
Consecutively carrying out too many measurements may result in
injury to the patient.
7.2 MEASUREMENT PROCEDURE
The MESI ABI is intended for Ankle-Brachial Pressure Index
measurement. Upper arm blood pressure measurements are for
information purposes only.
Do not use the device when it is wet. After cleaning the device with a
damp cloth, wait for it to dry. Only use the device when it is completely
dry.
The MESI ABI is not intended for use in conjunction with high
frequency surgical equipment.
The AC/DC power supply must be connected to an easily accessible
socket (the AC/DC power supply also serves for galvanic isolation).