HDM97Pocket Quick Reference
\\
4
www.ibpmedical.com
Basic Settings
BASIC SETTINGS
After switching on the instrument immediately press “F” key to invoke the basic settings menu. The parameter to change can
be selected using the navigation keys down arrow and up arrow. By pressing the navigation key (the “ok” button) you can
adjust the value of each parameter.
These parameters are as follows:
Parameter
Meter Versions
Description
AUTO-OFF
All
Set the delay time fort he auto power off function or disables it
BEEP
All
Enables / disables the keypad acknowledge beep
CAL-RES
All
Overwrites the user calibration dataset with the device initial calibration
dataset
LANGUAGE
All
Selectionof display language.
PHT
BM,BH, BO,BP,BQ
Target time adjustment for pressure holt test (PHT)
TIMER
All
Enables / disables the stopwatch function
Flow
BL, BQ
Enables / disables the Flow channel
pH
BP
enables / disables the pH channel
TEMP
BN, BO, BP, BQ
Enables / disables the sole readout of the temperature channel
PR HR-Res
BM, BO, BP, BQ
Enables / disables the high resolution for pressure channel
AUTO-OFF
OK
BEEP
OK
OK
ESC
OK
ESC
OFF
30 MIN
60 MIN
90 MIN
disables function
30 minute delay
60 minute delay
90 minutes delay
ON
OFF
keypad beep enabled
keypad been disabled
Then
to apply and save setting,
or
to discard this setting.
CAL-RES
OK
Press 5 seconds until the counter in the display reaches zero. Then a calibration dataset reset will
be preformed. This takes a couple of seonds. The instruments performs a restart afterwards.
LANGUAGE
OK
DEUTSCH
ENGLISH
German language
English language
OK
ESC
Then
to apply and save setting,
or
to discard this setting.