CONFIGURATION
GENERAL
The 4I24M port address and I/O power connection options are set with jumpers. Each group of
jumpers will be discussed separately by function. In the following discussions, when the words "up",
"down", "right", and "left" are used it is assumed that the 4I24M I/O card is oriented with its bus
connectors J1 and J2 at the bottom edge of the card (nearest the person doing the configuration).
DEFAULT JUMPER SETTINGS
Factory default 4I24M jumpering is as follows:
FUNCTION
JUMPER(S)
SETTING
4I24M power option
W5
I/O conns pin 49 = gnd
4I24M ground option
W1,W4,W15
I/O even pins = gnd
4I24M bit A0 option
W2,W3,W14
I/O conns pin 1 = bit A0
4I24M Base address
W6,W7,W8,W9
0200H
W10,W11
4I24M Aliased address
W12,W13
0000H
Page 5
4I24M USER'S MANUAL
Summary of Contents for 4I24M Series
Page 6: ...CONFIGURATION DEFAULT JUMPER SETTINGS Page 6 4I24M USER S MANUAL ...
Page 8: ...CONFIGURATION BASE AND ALIASED ADDRESS JUMPERS Page 8 4I24M USER S MANUAL ...
Page 10: ...CONFIGURATION POWER OPTION JUMPERS Page 10 4I24M USER S MANUAL ...
Page 19: ...REFERENCE INFORMATION SCHEMATICS Page 19 4I24M USER S MANUAL ...