V5
75
5-
58
1-
02
0
1/1
5
6
The brightness threshold (right-hand value) flashes. The
left-hand value shows the currently measured bright-
ness.
3
Set the brightness threshold on a scale from 00
(dark) to 99 (bright) with push-button or .
4
Confirm setting with
[OK]
.
Setting the blind position for sun protection func-
tion
1
Open advanced menu: Press
[Menu]
push-button
for 4 s.
2
Press
[Menu]
push-button repeatedly until the fol-
lowing display appears.
The time taken for the blind to move up is displayed in
seconds in order to completely release the sensor (here
default setting):
3
Set the blind position on a scale from 2 (raise fast)
to 16 (raise slow) with push-button or .
4
Confirm setting with
[OK]
.
Setting the behaviour for wind alarm
(Only in combination with blind control insert, brightness
sensor with wind sensor interface and DCF and wind
sensor)
1
Open advanced menu: Press
[Menu]
push-button
for 4 s.
2
Press
[Menu]
push-button repeatedly until the fol-
lowing display appears.
The display "Lower in the event of wind alarm" flashes.
3
Set the behaviour of the blind in the event of wind
alarm using the push-button or the push-but-
ton.
4
Confirm setting with
[OK]
.
Display settings
Setting display brightness
1
Open advanced menu: Press
[Menu]
push-button
for 4 s.
2
Press
[Menu]
push-button repeatedly until the fol-
lowing display appears.
The display brightness display flashes.
3
Set the display brightness on a scale from 00 (off) to
04 (bright) with the or push-button.
4
Confirm setting with
[OK]
.
YES Blind is raised in the event of wind alarm
(standard setting).
nO
Blind does not react to wind alarm.
YES Blind is lowered in the event of wind
alarm.
Set automatic deactivation of display lighting
(The setting option is not shown if the display brightness
is set to "0".)
1
Open advanced menu: Press
[Menu]
push-button
for 4 s.
2
Press
[Menu]
push-button repeatedly until the fol-
lowing display appears.
The current setting appears (here default setting: Display
lighting is on permanently):
3
Change setting with push-button or .
4
Confirm setting with
[OK]
.
Astro function
In addition to setting switching times, you can adjust the
lowering/raising behaviour of your blind and the switch-
ing on/off behaviour of your lighting to actual sunrise/
sunset using the
Astro function
. For this purpose the
module contains an integrated astronomical calendar
that calculates the sunrise and sunset for every day of
the year.
|
The following explanations apply to Central Euro-
pean Time (CET). In the case of Central Europe-
an Summer Time (CEST) the Astro curves vary
by +/- 1h. This is automatically taken into account
by the module.
You can activate the astro function separately for each
switching time (see "Set switching times").
If the activated astro function has calculated that it will
still be dark outside at the set switching time (e.g."Raise
blind at 6:30 a.m."), it will not raise the blind until the sun
rises.
Likewise, the blind will be lowered at sunset, if the acti-
vated astro function has calculated that it will be dark be-
fore the set switching time (e.g."Lower blind at 7:10
p.m."). The lighting behaviour is identical.
Other switching times set for daylight hours are not af-
fected by the astro function.
LOn: Display lighting is on permanently.
Lt:
Display lighting switches off automatically
10 seconds after the last input.
Notes on advanced functions
Astro function - application examples
A
Set UP time 6:30 a.m.
B
Executed UP time
C
Executed DOWN time
D
Set DOWN time 7:10 p.m.
Example 1:
You want the blind to be raised at sunrise and lowered at
sunset each day.
• Switching time : Monday - Sunday 4:00 a.m., astro
function activated.
• Switching time : Monday - Sunday 10:30 p.m., astro
function activated.
Example 2:
You want the lighting (e.g. outside lights) to be switched
off each day at sunrise and to be switched on each night
at sunset.
• Switching time : Monday - Sunday 4:00 a.m., astro
function activated.
• Switching time : Monday - Sunday 10:30 p.m., astro
function activated.
|
If you want to control the blind and lighting with
the astro function only, you must be sure to set the
switching times for a time in which it is guaranteed
to be dark outside.
Example 3:
You want the blind to be raised each morning at sunrise,
yet not before 6:30 a.m. At night you want the blind to be
lowered no later than 7:10 p.m. or at sunset, if sunset is
before 7:10 p.m.
• Switching time : Monday - Sunday 6:30 a.m., astro
function activated.
• Switching time : Monday - Sunday 7:10 p.m., astro
function activated.
When it is still dark outside at 6:30 a.m., the astro func-
tion intervenes, and the blind is only raised at the actual
time of sunrise. If it is already dark before 7:10 p.m., the
astro function causes the blind to be lowered earlier, at
the actual time of sunset.
However, when the actual time of sunrise is before 6:30
a.m. the astro function will
not
intervene, and the blind is
raised at 6.30 a.m. If it is still light at 7:10 p.m., the astro
function will
not
intervene, and the blind is lowered at
7:10 p.m.
Astro time shift
The integrated astronomical calendar is designed for the
centre of the Central European Time (CET) zone. The
astro time shift takes into account the actual times of
sunrise and sunset at different locations. You can adapt
the astro function with astro time shift to the specific lo-
cation and correct the astro times calculated by the mod-
ule by max. ±2 hours (see "Setting the astro time shift").
16
2
4
6
8
10
12
14
18
20
21
22
23
24
12
1
2
3
4
5
6
7
8
9 10 11
A
B
C
D
