26
1
25mm
2
3
4
2
6
5
Cover stitch middle
needle (D)
Open looper cover. (See page 12)
* For Triple 5.6mm cover stitch, install cover stitch
right needle (E), cover stitch middle needle (D)
and cover stitch left needle (C). (See pages 13)
* Pass thread through needles (E), (D) and (C) and
thread cover stitch looper (brown).
(See pages 15~20)
* The graduations on seam guide plate indicate the
distance from cover stitch middle needle. Use it
as a guide when positioning fabric edge.
* Close looper cover.
*
21. HOW TO SEW A COVER STITCH
* This machine can produce a 3-thread 5.6 mm
wide bottom cover stitch.
* The cover stitch can be used for covering, binding
or top-stitching necklines and for hemming the
bottom, of T-shirts and sweat suits, etc. in
addition to flat joining seams (plain seaming).
* The cover stitch is most suitable for stretchy
fabrics such as knit.
* It also can be used in woven fabrics such as
denim, but careful attention must be paid to the
tension settings or there is the possibility of
thread breakage and or skipping.
* If you experience skipping or thread breakage
sewing denim change needles first and then
adjust the tensions little by little (1/4 number at a
time).
C
E
D
(1) MACHINE SET UP
Be sure to turn off the power switch.
(
)
1"
Summary of Contents for MK 4055
Page 1: ...INSTRUCTION BOOK INSTRUCTION BOOK INSTRUCTION BOOK...
Page 33: ...J1P17...
