62
Establezca el nivel de potencia (
Power %
) del microondas necesario
girando la esfera del control del microondas.
Observación:
•
Para la cocción por microondas solamente, la esfera de la
temperatura de la convección debe ponerse a ‘0’. Para obtener
mejores resultados, el horno debería estar frío.
•
Para la cocción por convección solamente, la esfera del microondas
debe ponerse a ‘0’. La cocción por convección solamente puede
llevarse a cabo sin poner ningún tiempo.
•
Debe tenerse cuidado al descongelar en un horno caliente. Los
productos deben girarse con frecuencia para evitar que se quemen
los costados. Para obtener mejores resultados, descongele primero
por la mañana cuando el horno aún está frío.
•
La cocción por combinación y convección solamente puede llevarse
a cabo con un aumento de temperatura pero debe prestarse
atención extra a la temporización.
•
Cuando un ciclo de convección solamente programado manualmente
ya está en marcha, puede añadirse el calor de microondas
.
Sin
embargo, recomendamos firmemente que sólo el operario del
microondas más experimentado utilice esta función, ya que la
energía de microondas estará luego en la selección de tiempo para
la cocción por convección.
•
La cocción puede interrumpirse abriendo la puerta (PAUSA ).
Cierre la puerta y toque el botón de
inicio
para continuar.
CONTROLES MANUALES ( MODELO RD501 )
Establezca la temperatura (
temp ºC
) del horno necesaria girando la esfera
del control de temperatura en el sentido de las agujas del reloj. El
indicador de la temperatura de la convección se iluminará hasta que se
consiga la temperatura seleccionada. Para mejores resultados, espere
que esto ocurra. El indicador se encenderá y se apagará y la temperatura
de dentro del horno se mantendrá.
Ponga el horno en marcha.
p.ej: 175ºC
Establezca el tiempo de cocción necesario (
time
) girando la esfera de
selección del tiempo en el sentido de las agujas del reloj.
p.ej: 50%
Pulse el botón de
INICIO (
start
)
.
El indicador de
inicio
se
iluminará y el temporizador
contará atrás hasta cero.
Cuando la cocción ha finalizado,
un timbre avisa al operario.
p.ej: 15 minutos
1
2
3
4
5
Potenciá
%
tiempo
inicio