BEFORE TRIP INSPECTION PROCEDURE
BRAKE AND ELECTRICAL CONTROLS
BRAKE CONTROLS
Check brakes for proper operation before
each trip. On trailers with electric brakes,
fasten the breakaway switch actuating cable
securely to the towing vehicle.
Make certain
the breakaway battery is fully charged
.
Your breakaway battery kit contains a tow
charger which can keep your battery charged.
The charger is hooked to the clearance light
circuit and will charge while running lights
are being used.
Connect the front receptacle and check for
proper operation of stop lights, right / left turn
signals and running lights. Repair
malfunctioning lights prior to trip. Check and
clean all lights and reflectors. Proper
operation requires clean and positive contact
between electrical connectors. Be sure the
plug on the light cable and trailer connectors
are free of corrosion. Inspect all wiring to see
it is not frayed.
SIDE STRUCTURE
Check the trailer sides for inconspicuous damage to the top and bottom rails as well as the side
structure. Any problems observed in the side structure should be corrected immediately to
prevent the damage from extending further. Unrepaired damage could affect the safe load
carrying capacity of the side structure.
Punched side trailers are built with aluminum side skin.
DO NOT
use holes to hang heavy
objects on the side.
DO NOT
use the holes to tie animals. This could damage the side skin.
Failure to follow these procedures may result in unnecessary wear and malfunction. It may also
create difficulties with the mechanical operation of the trailer, and could possibly result in
personal injury and/or property damage.
4-2
Summary of Contents for GOOSENECK LIVESTOCK TRAILER
Page 26: ...SAFETY 10 2...
Page 27: ...ELECTRICAL SYSTEM 11 1 BASIC WIRING DIAGRAM...
Page 36: ......
Page 37: ......