20.2 litres water filled in-cycle through the TURBINE (4 litres in total)
21.Pressure switch interrogated (O - C) (with wash motor on)
• if C (closed), stops filling
• if O (open), fills until pressure switch threshold reached or up to a
maximum of 6 litres
• if the pressure switch has still not opened by 6 litres, the DW will show
the water level alarm.
Probable cause of malfunction: pressure switch faulty or cables
disconnected/inverted
22.1 minute wait while dishwasher prepares to fill with WASH MOTOR on
•
never more than a max. 6 litres. More than this and the DW will show
the water level alarm.
Probable cause of malfunction: pressure switch faulty or cables
disconnected/inverted
23.5 seconds WASH MOTOR, HEATING ELEMENT on
24.10 seconds DIRECTIONAL CONTROL VALVE on
25.10 seconds WASH MOTOR
26.REGENERATION solenoid energized 15 seconds
27.HEATING ELEMENT on 10 seconds
28.DUO WASH on 10 seconds
29.drain O + 5 secs.
•
if the pressure switch does not open by max. 4 minutes, the DW will show
the drain timeout alarm.
Probable cause of malfunction: drain pump disconnected or faulty or
pressure switch faulty/cables inverted.
30.WASH MOTOR (switch open) on 5 seconds
31.MOTOR FAN on 10 seconds
32.FILL SOLENOID VALVE on 20 seconds
33.END CYCLE
Nota:
the test cycle must fully reset as happens with the wash cycle.
