MERLO PANORAMIC, User And Maintenance Manual

Page: 65 / 200

4 - COMMANDS AND INSTRUMENTS
4 - 10
• display of info messages
In the event the operator is carrying out an unauthorised manoeuvre, the system
indicates this by displaying one or more info message icons in the middle of the
display (62) (see photo on the side). When the info message icons appear, the
buzzer goes off at the same time, and emits a continuous tone.
The following table shows the info message icons available for your machine, the
ways the icons come on and the operations to carry out to resolve the problem.
FAULT DESCRIPTION ICONS DISPLAYED PROBLEM SOLVING
It is impossible to start the engine using the
direction selector in the forwards or reverse
position.
Steady / Flashing
Set the direction selector in the central position
(neutral) and then start the diesel engine.
Request for scheduled maintenance.
Steady / Flashing
Request for scheduled machine maintenance.
Refer to the information provided in the
Operator Manual
It is impossible to move the machine with the
parking brake engaged.
Steady / Flashing
Deactivate the parking brake and then place
the direction selector in the forwards or reverse
position in order to move the machine.
It is impossible to change gear if the direction
selector is in the forwards or reverse position.
It is impossible to select the driving direction
(forwards or reverse) if the operator is not
sitting correctly on the driving seat
Forward or reverse driving direction selected
with the engine OFF and the starter key in
position “R” (instrumental panel comes on)
Flashing
To change gear, firstly place the direction
selector in the central position (neutral) and
then engage the required gear
To drive the machine, the operator must sit
correctly in the driver's seat (indicator light 90
OFF);
Shift the drive direction selector to the central
position (neutral).
Emergency button pressed.
Flashing
Release the emergency button by rotating it in
the direction of the arrow
Electrical plug of the attachment not connected
to the socket on the machine's boom
Incorrect position of the 3-position blue
command source selector (available together
with a platform or radio remote control)
Steady / Steady
Connect the plug from the attachment correctly
to the electrical outlet on the telescopic boom
of the machine
Select the appropriate command source for the
attachments installed
Electrical plug of the attachment not connected
to the socket on the machine's boom
Incorrect position of the 2-position key
command source selector (available together
with a platform or radio remote control)
Steady / Steady
Connect the plug from the attachment correctly
to the electrical outlet on the telescopic boom
of the machine
Select the appropriate command source for the
tool installed
Radio control signal insufficient (available with
purchase of a remote control unit)
Steady
Radio field interference or too distant from
machine
Control joystick fault (available with purchase
of single-lever joystick)
Flashing
Contact Merlo Technical Assistance Service
Machine lock following activation of satellite
anti-theft device (available with purchase of
optional SATELLITE ANTI-THEFT DEVICE)
Flashing / Steady
Switch off the satellite anti-theft device
NOTE! To switch off an info-message icon, it is also possible to press the (OK) button on the control panel
(P1); in this case, the window is disabled but the problem persists.