MERLO PANORAMIC, User And Maintenance Manual

Page: 114 / 200

6 - ORDINARY MAINTENANCE
6 - 12
MERLO PERIODIC MAINTENANCE SCHEDULE
This paragraph contains the periodic maintenance schedule which has to be applied to the machine by strictly following the
predetermined time intervals. If the machine is used in particularly heavy duty conditions, maintenance shall be carried out at
shorter intervals.
Machine maintenance is scheduled as follows:
- hourly bands (every 10 hours, 50 hours, 500 hours, 1000 hours, 1500 hours)
- regular intervals (daily, weekly, every 6 months, every 12 months, every 18 months)
Hourly bands and regular intervals are linked in the following way:
1) EVERY 10 HOURS OR DAILY
2) EVERY 50 HOURS OR WEEKLY
3) EVERY 500 HOURS OR 6 MONTHS
4) EVERY 1000 HOURS OR 12 MONTHS
5) EVERY 1500 HOURS OR 18 MONTHS
The operator must perform ordinary machine maintenance in relation to which of the 2 situations (hourly or interval) occurs first.
All maintenance operations must be performed in a cyclic manner. At each maintenance interval, also carry out the operations
described in the previous intervals. For instance, every 1,000 hours, also carry out the maintenance operations foreseen at
500, 50 and 10 hour intervals. The 5 scheduled maintenance bands, indicated in the table below, will be described in further
detail in the following paragraphs.
WARNING!
• Maintenance of your machine must be performed by skilled and competent personnel.
• To perform maintenance operations correctly, place the machine on flat, firm ground.
• Before performing the maintenance task, make sure that the diesel engine is OFF and that the battery cut-off switch
(if fitted) is in the OFF position
• For more information about the oils and greases to be used in machine maintenance procedures, refer to the
paragraph "FUELS AND LUBRICANTS" in this section and the OIL TABLE in the section "COMMAND STICKERS -
BROCHURES IN CA". Lubricators which are not listed in the maintenance table shall be periodically greased
according EVERY 1000 HOURS OR 12 MONTHS in relation to machine use conditions.
• Always use original spare parts approved by Merlo S.p.a.
For information on maintenance times and interventions to carry out on diesel engines always refer to the engine
manual supplied as standard with the machine.
It is recommended to note the maintenance work date in order to carry out operations on a regular basis.