Copyright Meritor, Inc., 2022
MM-0861 / Revised 06-22
Page 42
Printed in USA
4 Removal
14. Construct suitable mounting brackets or similar fixtures.
Attach the brackets to the front half of the transfer case by
installing bolts through the mounting holes in the transfer
case. Figure 4.7 and Figure 4.8.
NOTE:
Eyebolts permit easier lifting of the transfer case.
4000187c
MOUNTING
HOLES
Figure 4.7
4012326a
MOUNTING
HOLES
Figure 4.8
15. Install eyebolts in the lifting holes located in either half of the
transfer case housing. Lifting holes are located at the top
and bottom of each half of the transfer case near the center.
Figure 4.9.
4000188a
LIFTING
HOLE
LIFTING
HOLE
REAR
COVER
LIFTING
HOLE
FRONT
COVER
LIFTING
HOLE
Figure 4.9
DANGER
Support the transfer case with a lifting strap before mounting the
transfer case into the repair stand. A transfer case not supported
correctly can fall. Death or serious personal injury and damage to
components can result.
NOTE:
The transfer case filled with lubricant weighs approximately
750 lbs (340.2 kg) without the PTO.
16. Attach a suitable lifting device to the eyebolts to lift the
transfer case. Use suitable brackets to mount the case in the
repair stand. Figure 4.7 and Figure 4.8.