Meridian SEED EXPRESS 240 RT, Operator'S Manual

Page: 26 / 96

26
5.2 ENGINE AND CONTROLS
A Honda
®
engine is used with this unit. Always
read the engine Operator’s Manual supplied
with the seed tender for the detailed operating
procedures.
1. Electrical System Key Switch
This key switch controls the power to the
electrical system. Turn the key clockwise to turn
the electrical system ON. The key must be in
the ON position for the engine to start. Turn the
key counterclockwise to stop the engine and
turn OFF the electrical system.
2. Engine Start Button
Press and hold this button until the engine
starts. Also set the choke lever on the engine
when starting the engine. Turn the key switch
counterclockwise to turn OFF the engine.
3. Fuel Shut-Off Valve
Each engine is equipped with a valve between
the fuel tank and the carburetor. Slide the fuel
valve toward the engine to turn ON and away
for OFF. Turn the fuel OFF when not in use or
before transporting.
4. Throttle Lever
This lever controls the engine RPM. Move the
lever to increase or decrease the RPM. Always
run at maximum throttle while operating.
5. Choke Lever
The choke lever controls the fuel/air mixture to
the engine. Close the choke when starting if the
engine is cold. Open the choke as the engine
warms. Always open the choke fully during
operation.
6. Starting Rope
This retracting rope and T-bar is an optional
method used to start the engine. Grasp the
T‑barfirmlyandpulltheropesharplytostart
the engine. The key on master control must be
ON for the engine to start.
7. Battery (12 Volt)
A 12 Volt battery supplies the power to start the
gasoline engine. When the engine is operating,
a trickle charge is sent to the battery to keep it
fully charged.