26
The housing of the RF DSW features several
circular punch-out access holes to provide
flexibility for the routing of cables into the
product.
Open the access hole which is most
conveniently positioned for the routing of the
incoming mains power feed to be connected
to the RF DSW.
Open whichever other access hole is
convenient for the SpeakerLink cable (or
cables) to be routed through the RF DSW.
Note: SpeakerLink cables are routed through
the RF DSW but not connected to it.
Feed the mains power cable through its grommeted hole or, if required by the national and local electrical and building
regulations, use a suitable cable-gland in place of the grommet.
Feed the SpeakerLink cable(s) through its grommeted hole or, if required by the national and local electrical and
building regulations, use a suitable cable-gland in place of the grommet.
The mains terminal-box should be removed from
the RF DSW by undoing its three retaining screws
and lifting it out of the housing.
