10
Step 5.
Step 5.
Step 5.
Step 5.
Fit the subwoofer assembly to the studwork
with appropriate fixings through the 18 holes in the
mounting wings. Note: fixings not supplied.
If an outer layer of plasterboard (sheetrock) is
being fitted to the wall, proceed to the next step. If
no outer layer is being fitted, skip to Step 10
Step 10
Step 10
Step 10.
Step 6.
Step 6.
Step 6.
Step 6.
Prepare the outer layer of plasterboard
(sheetrock) prior to fitting to the wall. Use the
template supplied to cut the aperture. Fit
plasterboard edging to the inner edges of the
aperture. This edging will greatly ease the removal
of the installation shield later.
