Meriam PIT5000, User Manual, Page: 20 / 57

4. Measure pane (continued)
1 – Optional : Connect the Stroke Counter cable
to the Measure pane


Measure
Stroke Counter

Note: The PIT5000 has a digital counter that is equipped
to supply power and count the strokes made by high-
pressure, plunger pumps during pressurization of the
pipe section under test and the subsequent pressure
test.
2 - Pressure hose

Measure

3 & 4 - Connect the RTD cables to the Measure
pane

Ambient Temp
Note: The two RTD cables are identified by M12
connectors at both ends.

Optional: Pipe Temp
Note: If you do not require the pipe temperature , you
can clear this measurement from the Setup > Test Info
sub-tab.