Integrated Peripherals Option
This option displays a list of items that defines the operation of
peripheral components on the system's input/output ports.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Integrated Peripherals
Item Help
OnChip
IDE Channel0
Enabled
OnChip
IDE Channel1
Enabled
IDE Prefetch Mode
Enabled
Primary
Master PIO
Auto
Primary
Slave
PIO
Auto
Secondary
Master
PIO
Auto
Secondary
Slave PIO
Auto
Primary
Master UDMA
Auto
Primary
Slave
UDMA
Auto
Secondary
Master
UDMA
Auto
Secondary
Slave UDMA
Auto
Init Display First
PCI Slot
IDE HDD Block Mode
Enabled
Onboard FDD Controller
Enabled
Onboard Serial Port 1
Auto
Onboard Serial Port 2
Auto
UART 2 Mode
Standard
x IR Function Duplex
Half
x TX,RX inverting enable
No, Yes
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous
Values
F6:Fail-Safe
Defaults F7:Optimized
Defaults
On-Chip IDE Channel 0/1 (Enabled)
Use these items to enable or disable the PCI IDE channels
that are integrated on the mainboard.
IDE Prefetch Mode (Enabled)
The onboard IDE drive interfaces supports IDE prefetching,
for faster drive access. If you install a primary and secondary
add-on IDE interface, set this field to Disabled if the interface
does not support prefetching.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave de-
vice. These four items let you assign which kind of PIO
(Programmed Input/Output) is used by IDE devices. You can
choose Auto, to let the system auto detect which PIO mode is
best, or you can install a PIO mode from 0-4.
50
