Mercury 30 - 60 HP, Installation Manual, Page: 7 / 16

- 7 -
30-40 HP (2 CYL.) MANUAL START MODELS
USING QUICKSILVER 2000 SERIES SIDE
MOUNT REMOTE CONTROL
1. Route the remote control harness (a) around the
back of the engine block as shown. Position the
harness so that the harness will not interfere with
shift and throttle operation.
a
2. Connect the black wire (a) to engine ground and
the black/yellow wire (b) to the black/yellow en-
gine wire.
BLK/YEL
BLK/YEL
ENGINE GROUND
a
b
a
Battery Cable Connections
SINGLE OUTBOARD
a
b
(+)
(–)
c
a - Red Sleeve (Positive)
b - Black Sleeve (Negative)
c - Starting Battery
DUAL OUTBOARD
1. Connect a common ground cable (wire size same
as engine battery cables) between negative (–)
terminals on starting batteries.
(–)
(–)
d
d - Ground Cable (Same Wire Size As Engine Battery Cable –
Connect Between Negative (–) Terminals