Mercury 2009 Sable Owner'S Manual Download Page 267

Page: 267 / 344

Stopping and securing the vehicle

1. Park on a level surface, set the
parking brake and activate hazard
flashers.

2. Place gearshift lever in P (Park)
and turn engine off.

Removing the spare tire and jack

1. Lift the trunk cargo cover, and
remove the wing nut that secures
the spare tire by turning it
counterclockwise.

2. Lift and remove the spare tire
from the trunk.

3. Remove the second wing nut that
secures the jack retention bracket
by turning it counterclockwise,
remove the jack kit from the
vehicle.

4. Remove the jack and the wrench
from the felt bag. Fold down the
wrench socket to use to loosen the
lug nuts and to operate the jack.

Tire change procedure

WARNING:

When one of the front wheels is off the ground, the

transmission alone will not prevent the vehicle from moving or

slipping off the jack, even if the vehicle is in P (Park).

2009 Sable

(mgo)

Owners Guide, 1st Printing
USA

(fus)

Roadside Emergencies

267

Summary of Contents for 2009 Sable

























































































































































































































































































































































Search results

Summary of Contents for 2009 Sable

Reviews:

Related manuals for 2009 Sable

Brands by name

Popular brands

Mercury 2009 Sable, Owner'S Manual

Search results

Summary of Contents for 2009 Sable

Reviews:

Related manuals for 2009 Sable

Brands by name

Popular brands