Mercury 2009 Sable Owner'S Manual Download Page 107

Page: 107 / 344

In AM, FM1, or FM2 mode:

•

Press SEEK to access the
next/previous strong station.

In Satellite radio mode (if
equipped):

•

Press and release SEEK to access
the next/previous preset.

•

Press and hold SEEK to fast
advance through subscribed
channels in the current category.

In CD mode:

•

Press SEEK to listen to the next/previous track on the disc.

In any mode:

•

Press VOL up or down to adjust
the volume.

•

Press MUTE to mute the volume.

Navigation system hands free
control feature (if equipped)

Press

briefly until the

voice

icon appears on the

Navigation display to use the voice
command feature.

Press

again to end a voice

command.

For further information on the
Navigation system, refer to the

Navigation System

supplement.

MUTE

MEDIA

SEEK

VOL

2009 Sable

(mgo)

Owners Guide, 1st Printing
USA

(fus)

Driver Controls

107

Summary of Contents for 2009 Sable

























































































































































































































































































































































Search results

Summary of Contents for 2009 Sable

Reviews:

Related manuals for 2009 Sable

Brands by name

Popular brands

Mercury 2009 Sable, Owner'S Manual

Search results

Summary of Contents for 2009 Sable

Reviews:

Related manuals for 2009 Sable

Brands by name

Popular brands