Mercury Racing HP565 Manual Download Page 9

Page: 9 / 151

eng

Maintenance

Service Responsibilities............................................................. 59

Replacement Service Parts....................................................... 60

Do‑It‑Yourself Maintenance Suggestions.................................. 60

Servicing High‑Horsepower Engines......................................... 62

Engine Maintenance Charts...................................................... 62

Bravo Drive Maintenance Charts............................................... 64

Checking Fluid Levels................................................................67

Closed Cooling System............................................................. 72

Changing Fluids......................................................................... 76

Lubrication................................................................................. 85

Propellers...................................................................................87

Flushing the Power Package..................................................... 90

Cleaning Seawater (Raw Water) Section of Oil Cooler............. 95

Changing Positive Crankcase Ventilation Valve........................ 96

Cleaning the Flame Arrester...................................................... 97

Serpentine Drive Belt................................................................. 99

Water‑Separating Fuel Filter....................................................102

Corrosion and Corrosion Protection........................................ 105

Battery..................................................................................... 112

Bottom of Boat......................................................................... 113

Inspection and Maintenance.................................................... 113

Attention Required After Submersion...................................... 113

Cold Weather or Extended Storage

Draining the Seawater System................................................ 114

Drain System Identification...................................................... 114

Air‑Actuated Single‑Point Drain System.................................. 116

Manual Drain System.............................................................. 122

Draining Water from the Cool Fuel Module............................. 125

Battery Storage........................................................................ 126

Recommissioning the Power Package.................................... 126

Summary of Contents for HP565
























































































































































Search results

Summary of Contents for HP565

Reviews:

Mercury Racing HP565, Manual, Page: 9 / 151

Search results

Summary of Contents for HP565

Reviews: