MAINTENANCE
eng
87
95
8016
Tube
Ref No.
Description
Where Used
Part No.
95
2-4-C Marine
Lubricant with
PTFE
Drive shaft grease fittings
92-802859A 1
Propellers
BRAVO 1 XR MODEL PROPELLERS
!
WARNING
Rotating propellers can cause serious injury or death. Never
operate the boat out of the water with a propeller installed.
Before installing or removing a propeller, place the drive unit in
neutral and engage the lanyard stop switch to prevent the
engine from starting. Place a block of wood between the
propeller blade and the anti‑ventilation plate.
NOTICE
Operating the engine with a loose propeller can damage the
propeller, the drive, or drive components. Always tighten the
propeller nut or nuts to specification and check for tightness
periodically and at the required maintenance interval.
Installation
1. Apply the following lubricant to the entire exposed surface of
the propeller shaft:
Summary of Contents for HP565
Page 11: ...eng xi Maintenance Log Maintenance Log 139...
Page 12: ...xii eng...