12/10/2018
ISO OR POLE MOUNTING M80 GYROLED®
GT-0693-FEUX Ind A
Siège social/Head-quarters : Zone d’Activités « Les Gailletrous » - rue Louis Pasteur- 41260 LA CHAUSSEE SAINT VICTOR – FRANCE -
Tel : 00 33 (0) 2 54 57 52 52 – Fax 00 33 (0) 2 54 56 80 00
SAS au capital de 102. 400 € - APE (NAF) 2790 Z – SIRET 310 999 891 00040
Page 4
30656-00
WIRING AND FLASH PATTERN SELECTION
13 Flash patterns are integrated in the M80 GYROLED®. The operating mode setting must only be chosen
when the M80 GYROLED® is on and using a mobile magnet (not supplied). The operation consists in
moving the magnet in front a position located between the reference index and the fixing hole on its right.
A. MOBILE MAGNET (NOT SUPPLIED)
B. M80 GYROLED®
C. REFERENCE INDEX
D. FIXING HOLE
E. N°2 POWER SUPPLY WIRE
F. GYROLED® SWITCH (NOT SUPPLIED)
G. PROTECTION FUSE* (NOT SUPPLIED)
H. N°1 GROUND WIRE
AVAILABLE FLASH PATTERNS
1. R65 Rotating
2. R65 Double Flashing
3. Triple Flashing
4. Simple Flashing
5. ½ Rotating
6. ½ Double Flashing
7. ½ Triple Flashing
8. ½ Single Flashing
9. ICAO Flashing
10. ICAO Rotating
11. ½ ICAO Flashing
12. ½ ICAO Rotating
13. N°1 Led and n°8 Led 1Hz / 50% Flashing
Do not stare directly at the GYROLED
®
during operation, so as to avoid eye damage.
