12/10/2018
ISO OR POLE MOUNTING M80 GYROLED®
GT-0693-FEUX Ind A
Siège social/Head-quarters : Zone d’Activités « Les Gailletrous » - rue Louis Pasteur- 41260 LA CHAUSSEE SAINT VICTOR – FRANCE -
Tel : 00 33 (0) 2 54 57 52 52 – Fax 00 33 (0) 2 54 56 80 00
SAS au capital de 102. 400 € - APE (NAF) 2790 Z – SIRET 310 999 891 00040
Page 2
30656-00
RECOMMENDATIONS
The M80 GYROLED® installation on the vehicle should be done in compliance with the
specific current regulations regarding emergency and service vehicles special lighting.
The beacon flash pattern choice must also meet these requirements.
The installer is therefore fully responsible for the product installation and flash pattern
chosen.
The choice of the GYROLED® M80 position on a roof vehicle must meet regulation requirements on light
signalling installation.
M80 GYROLED®
Standard positioning LEDs are identified from
1 to 8 (Upper view).
A. VEHICLE FRONT
B. VEHICLE REAR
C. OPERATING MODE SELECTION SENSOR INDEX
D. VENT HOLE
It is also important to ensure that M80 GYROLED® is mounted more than 30 cm away from a radio or
phone device (Transceiver, cables, antennas, filters).
INSTALLATION
3 POINT ISO MOUNTING
Use protective seal as template if necessary
