PUMP AND RELATED COMPONENTS
SERVICE MANUAL NUMBER 24
90-861327--1 OCTOBER 1999
Page 9A-11
Hydraulic Hoses and Fluid Cooler
The following information is provided to assist in replacement of power steering fluid hoses
and to assure proper routing and connection to the cooler.
Replace high or low pressure hoses following:
IMPORTANT: Make hydraulic connections as quickly as possible to prevent fluid
leakage.
IMPORTANT: Be careful to not cross-thread or overtighten hose fittings.
High Pressure Hose (Pump-to-Control Valve)
REMOVAL
NOTE: Catch fluid that drains from pump and hoses in a suitable container.
1. Remove high pressure hose fitting with O-ring seal from pump fitting on rear of pump.
75228
b
a
Power Steering Pump Typical Location
a -
High Pressure Hose Fitting (With O-Ring - Not Visible In This View)
b -
Pump Fitting
2. Remove hose where routed and secured (port or starboard side), across top of engine,
near valve cover.
3. Remove fitting from control valve at transom. Remove hose.
73860
a
a -
Power Steering Hose Fitting
Index