P 11
Please retain product label and instructions for future reference
Step 17: Dormer Fit (
optional
)
Parts needed - No. 4 QTY 1
Measure and mark along the roof
following the position of the top
log board.
Place the dormer front panel (No. 4)
on top of the roof (
along the marked
position
) approximately in the
center of the building. Once in
position fix the dormer front to the
roof by screwing through the
framing at the back of the panel
into the board below.
*Ensure to screw into the
boarding.
4x120mm Screws
120mm
screw
Pre drill
hole
6
Step 18: Dormer Fit (
optional
)
Parts needed - No. 5 QTY 1
No. 6 QTY 1
Measure and mark along the roof
following the position of the
front two roof purlins to create
guide lines.
Place the dormer side panels
(No’s. 5 & 6) on top of the roof
resting on top of the front panel.
Once in position fix the dormer
sides into place by screwing
through the framing into the
dormer front panel using
3x40mm screws per side. Pull
both dormer sides together by
screwing through the framing on
both side using 4x70mm screws
per side. Once both sections are
in position use the guide lines to
secure each side through the
framing into the roof purlins
below.
*Ensure to screw into the
framing & purlins.
6x40mm Screws
8x70mm Screws
4x120mm Screws
40mm
screw
Pre drill
hole
70mm
screw
120mm
screw
4
Internal
5
