P 4
For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Please retain product label and instructions for future reference
Pre-assembly
*Please note:
Each board interlocks at either end in a staggered pattern.
Before securing ensure that the boards are fitted properly in their respective
tongues and grooves.
Step 1
Parts Needed - No. 31 QTY 2
No. 30 QTY 2
Lay the bearers (
No’s. 31 & 30
) onto a
firm and level surface (
free from
areas where standing water can
collect
) as shown in the illustration.
Fix the bearers together at each
corner screwing 2 screws per corner
using 8x70mm screws, ensuring the
bearer is flush.
Once fully assembled, ensure the
bearers are square by measuring
from corner to corner as illustrated,
making sure the measurements are
equal.
If the bearers are not aligned equally,
unscrew, adjust and re-align
accordingly.
8x70mm Screws
31
30
31
Pre drill
hole
70mm
screw
30
=
=
IMPORTANT:
Pre-drill before fixing screws.
Pre drill
hole
70mm
screw
Step 2
Parts Needed - No. 31 QTY 8
Following the same method
arrange the remaining bearers
(
No.31
) inside the assembled
frame.
*Ensure there is an equal
amount of space between each
frame.
Secure each of the frames in
place using 2x70mm screws for
each side of the bearer, ensuring
the bearers remain level.
32x70mm Screws
31
31
31
31
31
31
31
31
31
30
31
IMPORTANT:
Pre-drill before fixing screws.
