20
Press Lock QTY 1
PI-07-0018
Ring Pull QT Y2
PI-07-0032
Hinge QTY 6
PI-07-0004
Turn Button
QTY 2
PI-07-0182
23
21
22
25
26
Window Blocks QTY 16
PI-07-0011
27
Shed Finial QTY 2
SHED DIAMOND FINIAL
Felt
PI-01-0003
28
Tower Bolt QTY 2
PI-07-0068
8
9
10
Secondary Door QTY 1
AI-STDFGSD475X1715-V1
Master Door QTY 1
AI-STDFGMD475X1715-V1
11
Door Gable Top QTY 1
AI-S11SHADDGT2300X566-V1
Plain Gable Top QTY 1
AI-S11SHAGT2300X566-V1
12
Door Framing 28x28x940mm QTY 1
FS2828-940mm
13
Gable Cover Trims 12x30x610mm QTY 4
S1230-610mm
14
Cover Trims 12x40x1712mm QTY 7
S1240-1712mm
15
Door Frame Strip 12x40x996mm QTY 1
S1240-996mm
16
Door Frame Strip 12x40x1740mm QTY 2
S1240-1740mm
17
Door Cover Trim 12x43x940mm QTY 1
S1243-940mm
18
Fascia 12x95x1365mm QTY 4
S1295-1365mm
19
Ridge Bar 27x70x1703mm QTY 1
F2770-1703mm
Corner Brace
QTY 2
PI-07-0012
24
P 3
Please retain product label and instructions for future reference
For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed.
- When you are ready to start, make sure you have the right tools at hand (not supplied) including a Phillips screw-
driver, Stanley knife, Wood saw, Step ladder, Hammer and a Drill with 2mm bit.
- Ensure there is plenty of space and a clean dry area for assembly.
LOCATION FOR YOUR GARDEN BUILDING
A minimum of 60cm should be left around the perimeter of your garden building to allow access for maintenance,
annual treatment and to allow air flow around the building.
Where possible you should avoid placing your garden building underneath large trees to prevent the tree causing
damage to the building.
TIMBER
As with all natural materials, timber can be affected during various weather conditions. For the duration of heavy
or extended periods of rain, swelling of the wood panels may occur. Warping of the wood may also occur during
excessive dry spells due to an interior moisture loss. Unfortunately, these processes cannot be avoided but can be
helped. It is suggested that the outdoor building is sprayed with water during extended periods of warm sunshine
and sheltered as much as possible during rain or snow.
Once your garden building has been installed it will need to be treated as soon as possible and annually to prevent
the timber from deteriorating and to waterproof it. This is required to maintain the anti-rot guarantee.
Dip Treated buildings - Require a preservative treatment to protect against rot and decay and a waterproof treat-
ment to prevent water ingress
Pressure Treated buildings - Require a waterproof treatment to prevent water ingress
Log Cabins - Are supplied untreated and require a preservative and waterproofing treatment.
BUILDING A BASE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual treatment.
Ensure the base is level and is built on firm ground, to prevent distortion. Refer to diagrams for the base
dimensions, The base should be slightly smaller than the external measurement of the building, i.e. The cladding
should overlap the base, creating a run off for water. It is also recommended that the floor be at least 25mm above
the surrounding ground level to avoid flooding.
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
- Slabs laid on 50mm of sharp sand.
Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens
products independently tested to EN71 level, we cannot accept responsibility for your safety whilst erecting or
using this product.
5
4
Window QTY 4
AI-FW540X1132-V1
1
Side Window Panel QTY 2
AI-03S11SH1SFWC879X1717-V1
2
Side Panel QTY 2
AI-S11SHPP879X1717-V1
3
Back Panel QTY 2
AI-S11SHPPTF1150X1669-V1
7
Front Window Panel QTY 2
AI-03S11SH1SFWC680X1669-V1
6
Floor QTY 2
AI-R11MBF1175X1753-V1
Roof QTY 2
AI-S11MBAR2409X1345-V1
Building Content - Pack A
03DTSHAX0608FGD4MW-V1
03DTSHAX0608FGD4MW-V1
50mm Screw x 71
40mm Screw x 19
Felt Tacks x 150
30mm Black Screw x 48
60mm Screw x 10
20mm Black Screw x 22
Nail Bag
There may be extra screws present in the nail bag
30mm Screw x 110
Summary of Contents for 03DTSHAX0608FGD4MW-V1
Page 18: ...2 1 3 4...
Page 19: ...1 2...