Step 4
Parts needed - & 1 & &
Flip the assembled Door Panel (
No.
2 & 8
) over so the boards are facing
upwards and place the Door (
No. 11
)
within the door apperture as shown. Posi-
tion two Door Spacer Strips (
No. 41
) within
the top gap between the door (
No. 11
) and
the door panel (
No. 2
). Next position two
Door Spacer Strips (
No. 41
) down the
hinge side between the door (
No. 11
) and
the door panel (
No. 2
).
The 12mm gap is to prevent serious
injury should a childs fingers become
trapped between the door and the door
panel.
Place the Hinges (
No. 35
) at the top,
middle and bottom of the door (
No. 11
)
and using 7x30mm black screws per hinge,
fix the hinge to the door and the door
panel.
21x30mm black screws
30mm
screw
2
11
35
1!
2!
Pre drill
hole
3!
2
41
A
B
12mm
12mm
35
2
11
A
35
B
41
41
11
41
41
35
35
35
1!
2!
Pre drill
hole
Step 5
Parts needed -
Place the Floor
(No.1)
on a firm and level
base, ensure the base has suitable drain-
age free from areas where standing water
can collect. (see the front page for base
requirements).
1
1
Step 6
Parts needed - &
Place the assembled Back Panel (
No.3
)
and the Plain Panel (
No.5
) on top of the
floor, ensuring the panels are positioned
centrally on the floor, as shown in the
illustration.
Fix together by screwing through the
framing of the Back Panel (
No.3
) into the
framing of the Plain Panel (
No.5
) using
3x50mm screws.
Do not secure the building to the
Floor until the Roof is fitted.
3x50mm screws.
3
5
3
5
1!
2!
Pre drill
hole
50mm
screw
www.merciagardenproducts.co.uk P7
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
