background image

Please retain product label and instructions for future reference

            

Pre Assembly

Before assembling remove the transportation

blocks from the bottom of each panel.

Take care removing the blocks as to not damage

the panels. Tap with a flat headed screwdriver 

and hammer.

Dispose of the blocks once removed.

Step 1

Parts needed -           &           &      2   &        

Fix the Window Blocks (

No. 39)

 to the Windows (

No. 12

) as shown with 1x30mm screw.

Place one Window (

No. 12

) into each window hole in the Door Panel 

(No.2), 

fix by 

screwing though the Window Blocks (

No. 39

) with 2x30mm screws per window block 

as shown.  

Place one Window (

No. 12

) into the window hole in the Window Panel 

(No.4)

, fix by 

screwing though the Window Blocks (

No. 39

) with 2x30mm screws per window block 

as shown.  

18x30mm screws. 

39

30mm 

screw

1!

2!

Pre drill 

hole

4

2

39

12

2

12

4

12

12

REGISTER FOR YOUR

ANTI-ROT

GUARANTEE TODAY

PLEASE SCAN HERE:

Please retain product label and instructions for future reference

             

DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY 

COMPONENT PARTS PRIOR  TO ASSEMBLY.

www.merciagardenproducts.co.uk      P5

Summary of Contents for 02DTSHOA0705LFD3WBF-V1-PEFC





















Reviews: